RFID/ JiffyPass Reader (Web Client)

The JiffyPass reader is used to scan RFID cards or keyfobs. This device must be configured before using the RFID List.

To navigate to the JiffyPass Scanner settings, first click on the 3 lines at the top left-hand corner of the check-in/out screen, then click on Settings. If you do not see Settings, you’ll need to click on Switch to Admin Mode and then log in with admin credentials. Once there, you should see Settings.

Within Settings, click on Devices at the top of the page. If you see your JiffyPass Scanner in this menu, you can select it from here, otherwise, choose Add New Device.

Device Name – Set a name for the device

Minimum Characters – Sets the minimum amount of characters the scanner will read to determine an ID has been scanned

Max Time Entry – Defines how long the device has to scan an ID to ensure the minimum number of characters scanned is met.

Recommended Settings:

Min Characters: 1

Max Entry: 1000ms